iopra.blogg.se - 4ch mpeg4 dvr manual

4ch mpeg4 dvr manual update#
4ch mpeg4 dvr manual manual#
4ch mpeg4 dvr manual upgrade#

To the desired recording mode then press ENTER to confirm it.

4ch mpeg4 dvr manual manual#

The default mode is MANUAL so use the UP/DOWN/LEFT/RIGHT buttons to move To set the recording schedule, first move the highlight icon over the desired recording Step 1 Select the Recording Mode: MANUAL, ALWAYS, MOTION, ALARM, EVENT The procedure for setting the recording schedule is shown below.

Hour in length and the user can specify the recording mode for each hour during a week Weekly schedule defined here to control the recording function. When the record mode in record setup is set as schedule mode, the DVR will use the Schedule setup menu will appear on monitor. To access schedule setup, press ENTER button after moving highlight icon to Setup using direction (UP/ DOWN/ LEFT/ RIGHT) buttons. In the record setup menu, move to the cell of RECORD MODE and CH which is to be Use UP or DOWN and ENTER to select theĤ) RECORD MODE: MANUAL, ALWAYS, MOTION, ALARM, EVENT, SCHEDULE, Recording quality for specific CH can beĬhanged after pressing ENTER button. In the record setup menu, move to the cell of QUALITY and CH which is to be setup usingĭirection (UP/ DOWN/ LEFT/ RIGHT) buttons. Recording frames per second for specificĬH can be changed after pressing ENTER button. In the record setup menu, move to the cell of FPS and CH which is to be setup usingĭirection (UP/ DOWN/ LEFT/ RIGHT) buttons. Use UP or DOWN and ENTER to select theĢ) FPS: 30, 15, 10, 7.5, 6, 5, 3, 2 (NTSC) Recording resolution for specific CHĬan be changed after pressing ENTER button. Using direction (UP/ DOWN/ LEFT/ RIGHT) buttons. In the record setup menu, move to the cell of RESOLUTION and CH which is to be setup Record setup menu will appear on monitor.

To access record setup, press ENTER button after moving highlight icon to RECORD Input can be from an amplified source or directly from a microphone. A speaker with an amplifier will be needed for audio playback. Input and audio output to your amplifier because the DVR don’t amplify audio Audio signal input and output with RCA jack.4CH Audio input (RCA) and 1CH Audio Output (RCA) Sequentially and pop up the channel with event triggered.Ĥ. Is used for spot monitoring, which displays all of connected video channels the one marked “MONITOR” is used for main monitoring.2CH composite Video Outputs with BNC connectors Loop-through outputs can be utilized for it.ģ. Loop-through video outputs into another video equipments is requested, 4CH 4 channel composite video outputs with BNC connectors.Sources for 4CH video inputs can not be mixed. 4 channel composite video inputs with BNC connectors.Please refer to Appendix2 for CF compatible list.

4ch mpeg4 dvr manual upgrade#

CF card slot for data backup and FW upgrade by CF card. This red LED will will turn “ON” when CF card is inserted. This red LED will blink while recording or playback. This red LED will turn “ON” while LOCK button is working. This red LED will turn “ON” when motion detection or alarm have been triggered. This red LED will turn “ON” during recording. This green LED will turn “ON” when Power is “ON”.

/■ button can be pressed manually for all channel recording while emergency happens.

NOTE: Whatever recording mode for each channel is set as, Under emergency recording, will appear on right and up side of the monitor. Needed and press to stop recording again.

/■ button can be pressed to start recording while emergency recording is.

Sequentially according the cycle time set up in display setting menu.ĭisplay mode selection button is pressed for switching display modes, single If this button is pressed under 1CH display mode, each CH would start to display

a) SEARCH button can be used to enter playback sub-menu for searching out.

PLAY button is used to restart playback while pause PAUSE button is used to freeze playback. It support 2 to 16įF button to do high speed forward playback.

g) REW(◄◄), FF(►►), PLAY(►), PAUSE ( II ) and STOP( ■ ) buttons REW button can be used for high speed backward playback.

Recording 30fps at D1 30fps at D1 60fps at D1 120fps at D1

4ch mpeg4 dvr manual update#

CF card for firmware update & data archiving.

Independent channel resolution, quality & frame rate settings.

eSATA interface for external storage expansion.

MPEG4 compression format, D1 resolution.

This high-quality DVR is absolutely the best choice for your With Triplex support, Live, Record and Network can be Furthermore, the system stability and scalability can fulfill all your It takes the advanced MPEG4Ĭompression format to solve the storage problem of huge amount of video, and theįriendly UI design also enables users even unfamiliar with computer operations can easilyĬontrol this DVR. Performance standalone Digital Video Recorder. Designed for globally increasing surveillance requirements, ADR-7004L/C/S/M is a high